Micro Chip Linear Heat Detection

Brochures

60V054-02 LIST Sensor Cable System

LIST Sensor Cable System is a reliable and perfected system to analyse temperature data with unique specifcations.

The LIST Sensor Cable Fire Detection System is a reliable and perfected system to analyse temperature data with unique specifications.  The 18mm diameter detection cable is hermetically sealed and contains small hybrid circuits which, depending on the application, are placed at selectable intervals. The hybrids, which contain an integrated circuit with a defined address and a semiconductor temperature sensor, are electrically connected by a flat flexible cable. The cable can measure temperatures in a -40°C to +85°C (for short periods +200°C) range, with a resolution of 0,1°. It’s maintenance and adjustment free operation means that the sensor cable can be used in areas which are not or only partly accessible during normal operation.

60V133-01 LCT20 LIST Cable Tester

The LIST Cable Tester LCT 20 is a portable equipment for measuring of SEC 20 sensor cable. The LCT 20 has a slim aluminium case and integrated batteries. A special carrying strap will be supplied additionally.

60V156-01 Ex External Sensor

The stainless steel casing contains the semiconductor temperature sensor and a fuse to limit the maximum short circuit current. Sensor and connection cable are both glued into the casing, therefore sealing the entire assembly hermetically.

DMU 6012 Data Management Unit

The Data Management Unit DMU 6012 is a data-logging and visualisation system, which logs temperature values and messages from a LIST sensor cable system periodically and displays this information in various graphical forms.

External Sensor ESD

Highly resistant against corrosion, pitting and a multitude of chemicals

LISTcontroller SEC and LB

The LISTcontroller represents the central control and evaluation unit, utilising an ARM9™ embedded processor and two additional distributed processors to continually, quickly, and reliably monitor temperatures

RELMOD Relay module

The relay module is the extension for the LISTcontroller to transmit alarms and fault reports via dry contacts. Digital switch conditions can be read additionally from external sources. The module consists of 16 relays, which could be used as normally open or as normally closed contacts.

d-LIST Control Unit

The sensor control unit is the central supervisory element which provides up to two d-LIST sensor cables with power, performs the cyclic addressing of the connected sensors every 10 seconds, acquires the temperature values measured by each sensor and evaluates the data with reference to various criteria.

Sensor Cable SEC 15

Complete encapsulation to protect sensors from environmental influences

Sensor Cable SEC 20

Complete encapsulation to protect sensors from environmental influences

Sensor Cable SEC 15-Ex

Complete encapsulation to protect sensors from environmental influences